Forgot your password?

Frequently Asked Questions

*NOTICE: Information provided in our FAQ section is provided only for convenience, and does not constitute legal advice. Zoiper is not responsible for and does not guarantee that such information, including where it is available via links to other websites, will be full, correct or up-to-date, or that specific advice provided will have the desired result in all cases. For more information on the conditions for use of information available on the website, please check our General Terms.

Zoiper does not respond to answer or hang commands(buttons) from Jabra headset

Windows

Mac

The most common cases where Zoiper will not respond to clicks on your headsets answer or hang buttons are:

 

1. The Jabra HID option is Zoiper5 is not enabled. 

    - To enable the HID option, simply navigate to Zoiper's settings, then locate the "HID Integration" menu, make sure that the "Use Jabra HID" option is enabled.

 

2. You are using Jabra Direct. 

    - The Jabra Direct software is a control centre provided by Jabra to configure some settings on your headset and to allow integration with certain softphones. Zoiper however uses different implementation of the HID SDK from Jabra, which does not require the Jabra Direct software and actually may lead to a conflict. 

If you have the Jabra Direct software running and Zoiper does not react to your button clicks on the headset, simply turn off (shut-down) the Jabra Direct software. 

Zoiper

Follow us

Contacts

© 2003 - 2024 All rights reserved. Zoiper.com